Maniac Line Water Spot Remover (500ml.)

A specialized decontaminant designed to remove limescale stains, salt residues, cement deposits, and acid rain marks from glass, bodywork, chrome, plastic, and painted surfaces. It is ready to use, easy to apply, and non-abrasive – it chemically dissolves dirt. Ideal for use before applying nano coatings, waxes, or sealants, as it prepares the surface, improving adhesion. Its safe formula effectively cleans even stubborn deposits, restoring shine and clarity to surfaces.

Instructions for use:

Before using the product, it is recommended to perform a full car wash (rims, pre-wash, shampoo).

Spray the product onto localized stains and let it act for 30 seconds.

Wipe with a damp microfiber cloth, then with a dry one, for a perfectly clean surface.

For extremely stubborn stains, leave on for up to 60 seconds, but do not allow it to dry on the surface.

When working on the front or rear window, work on one side at a time, rinsing the surface thoroughly.

For widespread contamination, distribute the product evenly with a microfiber applicator, then rinse with clean water.

Use a soft brush in hard-to-reach areas.

For sensitive areas (emblems, plastic trims), use a soft brush and work carefully.

Recommendations and warnings:

Work on one surface section at a time, do not allow the product to dry.

Do not use on motorcycles.

Not suitable for use on hot or heated surfaces.

Use only in a well-ventilated area, do not inhale the spray.

Wear protective gloves, goggles, and face protection when using.

Keep out of reach of children.

In case of contact with skin or eyes, rinse immediately with plenty of water and seek medical advice.

Dispose of waste in accordance with local legal requirements.